Leak Testing (LT)

-LT LEVEL 1 CERTIFICATION COURSE

Indian and International professionals prefer certification training program in Non-Destructive Testing at Advanced Institute of Nondestructive Testing & Training (ANDT), to create a bright future in Oil and Gas, Petroleum, Aircraft, Refinery, Airspace-ship and other mechanical industries, by availing the NDT Level 1  Leak Testing certification courses at ANDT Greater Noida, ANDT Mumbai and It’s various branches all over India.

Participants get 100% Placement in India & Abroad after successful completion of NDT Level I Training program.

Leak Testing Syllabus is as per ASNT SNT TC 1A-2016 which trains participants so that they gain sound practical & theoretical knowledge to work under supervision of NDT LT Level II or Level III experts. It is required to have good health, positive mindset & technical skills to perform calibration and inspection as per written instruction under supervision of NDT LT Level II or Level III. 

NDT Level I Syllabus      

  • Disadvantages and advantages of LT methods
  • Identify hazards with LT
  • Enhancing testing environments
  • Techniques for improving inspection skills
  • Factors affecting LT measurement accuracy
  • Proper ways to carry out and conduct LT methods

After successful completion of training, participants will be appearing for Level I exam.

Participants will be certified as NDT LT Level I after successfully clearing the exam.

Leak Testing (LT)

-LT LEVEL II CERTIFICATION COURSE

Indian and International professionals prefer certification training program in Non-Destructive Testing at Advanced Institute of Nondestructive Testing & Training (ANDT), to create a bright future in Oil and Gas, Petroleum, Aircraft, Refinery, Airspace-ship and other mechanical industries, by availing the NDT Level II Leak Testing certification courses at ANDT Greater Noida, ANDT Mumbai and It’s various branches all over India.

Participants get 100% Placement in India & Abroad after successful completion of NDT Level II Training program.

Leak Testing Syllabus is as per ASNT SNT TC 1A-2016 which trains participants so that they gain sound practical & theoretical knowledge to work under supervision of NDT LT Level III experts. It is required to have good health, positive mindset & technical skills to perform calibration and inspection as per written instruction under supervision of NDT LT Level III. 

NDT Level II Syllabus 

  • Identify minute hazards with Leak Testing
  • Advanced Enhance testing environments
  • Advanced Techniques for improving inspection skills
  • Factors affecting LT measurement accuracy
  • Proper ways to carry out and conduct Advanced LT methods

After successful completion of training, participants will be appearing for Level II exam.

Participants will be certified as NDT LT Level II after successfully clearing the exam.

Leak Testing (LT)

Leak Testing is a form of Nondestructive Testing (NDT) method that uses either a pressurized or evacuated system to detect the location of leak and possibly measure the leakage through the leak. LT when compared to other methods, either surface (MT, PT) or Volumetric (UT, RT), has a higher degree of sensitivity to locate the leak or measure leakage and advanced LT is Divided into three main categories by American Society of Non-Destructive Testing.  Leak Detection, Leak Location, Leak Measurement. For this certification our NDT inspectors, engineers and technicians are qualified to NDT Level II as per written practices.

Advantages of Leak Testing

  • Leak Testing is simple in application.
  • Leak testing is very cost effective.
  • Leak Testing offers a wide range of detection.
  • Leak testing is safer to use.

Disadvantages of Leak Testing

  • Certain conditions interfere with BLT, and must be corrected prior to testing.
  • Contamination of test specimen is necessary
  • Improper test temperatures can interfere in the results
  • Contaminated Leak Test solutions.

Eligibility For Leak Testing NDT Training Level I, II Certification Courses

Eligibility, qualification and experience requirements as per written recommended practice of SNT-TC-1A, 2016 Edition are given below.

Non-destructive testing courses are considered as the most valuable professional courses to improve individuals’ skill sets and ladder for the steep career growth in quality control QA/QC functions in manufacturing and processing industries. These courses are especially considered as short term professional courses for any Mechanical, Metallurgical, Civil, Electrical and other engineering professionals. Based on proficiency requirements, certification is offered for NDT level I, level II and NDT level III. In order to be eligible for each NDT level, the individual should meet the required eligible criteria.

Candidates interested in certification of non-destructive testing should have sufficient education, training and experience to ensure eligibility in required NDT methods in which they are being considered. Candidates with diploma in Engineering or bachelor’s degree in Engineering (Mechanical engineering, Metallurgy, Civil or any engineering) or bachelor’s degree in math, science or plus 2 / intermediate with math, science are eligible for the courses. Depending on NDT level chosen, method selected, candidates with other educational qualifications also are eligible provided if they can meet the following recommended criteria.

In addition, the candidate must meet the following other eligibility as per the written practice.

 

Near-vision acuity

Color contrast differentiation

 

Please fill below form: