• Dual, Single, Delay line Transducers
• Measuring Range 0.8mm to 499mm
• Large LCD display with Back Light
• Raw material, Finished Components, Shop Floor, Laboratory, Site.
• Alarm mode and differential mode

Specification:

• Thickness Measuring Range: 0.8mm 499mm ( 0.030 to 19.96 inches) in steel@& Velocity 5890 M/sec. (dependent upon job, & Probe Type).
• Velocity Range: 700 M/Sec to 14000 M/Sec (0.0275 to 0.551 inches/U Sec).
• Measurement Rate: Two readings per second.
• Resolution: 0.01mm (0.0004 inches) for less then 100mm and 0.1mm ( (0.004 inches) for above 100mm (dependent on probe type).
• Transducer Frequency Ranges: 1MHz to 15MHz in Single, Dual & Delay line Mode.
• Other Measurements: Through Coat, Thickness
• Accuracy: 0.06mm (dependent on job and probe type).
• Units: Millimeters or Inches.
• Auto Off: 120 Seconds after last operation or on low battery.
• Key Pad: Sealed Tactile Keys, Keyboard lock mode selectable.
• Operatiing Temperature Range: 0 to 55 C.
• Calibration: Either using calibration block or Velocity entry or using known thickness block of required job material.