DS-5XX is a Multi-Channel Digital Ultrasonic Flaw Detector
It uses latest in Micro-Component technology to give features and performance not found to its class of equipment.
It’s channels are independently adjustable for Gain, Range, Gate and other parameters.
Each Channel has alarm LED which are prominently placed for operator visibility.
Specification:
Receiver bandwidth : 0.5 to 15MHz by broad band amplifier.
Gain : 0-80dB, 0.1,0.5.1,2,6, 12dB selectable
Rejection : Linear type (0- 99%) of full screen ,Height, 1% step Rejection will be ,displayed in single channel mode. In run all mode it will not be visible.
Operating mode : T-R, T+R by external connection.
Test mode : Pulse reflection or pulse Transmission
Echo display : Full wave rectified
Vertical linearity : 5.00%
Range : 10mm min. - 725mm. Max (@5890M/sec) -Continuous variable
Delay : 0-1000mm continuous variable
PRF : In built . Auto limiting for set parameters
Velocity : Velocity 2000m/s to 9999m/s
Time base linearity : 1% (±0.5%)
Triggering : Internal
Monitor Gates: 2 Gates for all channels, Width 1/10 screen to full screen; Height 1/10 screen to 99%; Gate start measured from initial Pulse
Thickness (Echo to Echo) - + 0.1mm or + set range/300 whichever more with peak & flank option.
Parameter Display : Permanent display -Horizontal & vertical graticule. Common display for all channels-Lock, Battery status, zoom, Freeze, Active freeze. Display for individual Channels---Gain, Beampath, Flawdepth/Thickness, Projection Distance, Envelop, Probe zero, Delay, Range, Reject, Gate1/Gate2 ON/OFF, Gate shift, Gate Width, Gate height, alarm mute, Configuration menu, Memory save, Memory recall.
Display Scheme : Any one channel on one A scan trace or four A scan traces with two channels each are displayed. Current display freeze & Active freeze, Accumulated display
Display Pattern : Filled / Unfilled
Reference pattern Display : Reference pattern can be displayed at the Background from selected location in Memory
Graticules : 5div(H) X 5div(V), further sub divided into 10 small divisions
Battery Indicator : Battery status indicator with auto shut Down
Memory : 200 multicolored 'A' scans memory , with calibration parameters and trigonometric values , 15 calibration sets.
Interface : PC & pen drive connectivity via USB
Trace Color :Selectable white and black background;
CH-1 ---WHITE;, CH- 2--GREEN;
CH-3—-ORANGE; CH4---LlGHT BLUE;
CH-5-PINK; CH6---YELLOW;
CH-7m-BLUE; CH-8-mOTHER COLOR
PC software : EECOWIN PC interface software Can upload saved "FRAME" set to PC through USB
