Product Details:

The New Generation Ultrasonic Flaw Detector DIGISCAN DS-324 combines EECI’s years of experience & commitment to customers, to provide the best flaw detector in its category by way of most advanced Technology, Convenience, Uniqueness, Affordability & Technical options for ultrasonic applications in the market.

The TFT colored display makes the A-scan representation stable and clear in all types of lighting condition. Equipped with inbuilt Highest Reserved Gain and Universal DGS, makes DIGISCAN DS-324 a complete solution in ultrasonic testing. The Rugged, Lightweight, Ergonomical design enables the operator to use DIGISCAN DS-324 in any environmental conditions.

Key Features:

• Unique Technology with an inbuilt Flaw sizing Universal DGS
• Highest Reserved Gain Flaw Detector in its category of equipment
• Improved S:N ratio with advance hardware
• User friendly interactive architecture
• Direct data transfer through Pen Drive
• A-Scan recording
• Simplified, easy to access navigation key
• Tough, Light Weight & durable Industrial grade body
• Large, bright, crystal clear CRT grade display
• Standard/ Dynamic DAC for flaw sizing
• Li-ion battery

Display:

• The DIGISCAN DS-324 provides a LCD (320 x 240 pixels) display resolution
• The display is unique in its category, providing excellent A-Scan representation and readability of minute features of the signal
• The display also incorporates 4 colors Schemes & grids/ graticule pattern to suit all type of individual operator levels/ preference
• Zoom function makes each and every minute echoes visible to the user

PULSER/RECEIVER:

• Receiver bandwidth: 0.5 to 20 MHz by wide band amplifier.
• Gain: 0-80dB, 0.1, 0.5, 1, 2, 6, 12dB Selectable
• Rejection: Linear type (0-99%), 1% step, partial rejection (0-25%), 1% step.
• Operating mode: Single probe, double probe
• Test mode: Pulse reflection or pulse transmission
• Energy: HI/LOW selectable
• Damping: NOR/HI selectable
• Vertical linearity: 5% (±2.5%)
• Probe connector: BNC type
• Echo display: Full wave rectified

Time Base:

• Range: 5mm min.-5Mtrs. Max (@ 5890M/sec), Continuous Variable, (0.1mm step for 10-100mm, 1mm step for 100mm-5Mtrs.)
• Probe Zero: 0-99.99mm

Monitor Gates:
2 Gates
-Width 1/10 screen to full screen
-Height 1/10 screen to 99%
-Gate start measured from '0' div
-± logic selectable

Memory:
-190 Memory Sets with 'A' Scans Frames, Calibration Parameters, Trigonometric Value, Label (ID Tag)
-190 Calibration Parameter Sets
-190 DAC Sets

PC software:
EECOWIN PC interface software compatible with Windows 8 64bit. Can upload A scan saved set to PC and Pen drive through the USB Port.